Lizard Skin vs. Dynamat - Leggete questo confronto prima di acquistare!

Quando si tratta di calmare il rumore della strada in un'auto, i tappetini fonoassorbenti sono una soluzione molto popolare. Ci sono anche modi in cui si può spruzzare la superficie interna di un'auto con materiali fonoassorbenti, ma solo una manciata di persone lo sanno.

However, in this article, I’ll compare two of the most effective sound-deadening materials on the market. If you’re unsure about which one would be best for your vehicle, then this article will benefit you!

Ognuno di questi prodotti ha i suoi vantaggi e svantaggi. La prima domanda che la gente tende a fare è: Quale materiale è migliore?

Basandomi sulla mia opinione ed esperienza, penso che Dynamat faccia un lavoro decente di insonorizzazione, ma ad un costo piuttosto alto, e tende ad essere un po' difficile da lavorare. Lizard Skin è molto facile da applicare e può coprire molte più aree del veicolo, con l'unico lato negativo che può diventare un po' disordinato.

Compra Lizard Skin Sound Control online

Acquista online i tappetini fonoassorbenti Dynamat Xtreme

Lizard Skin vs. Dynamat – Comparison Table

DynamatPelle di lucertola
La preparazione
Installare in aree che hanno bisogno di
fonoassorbente applicato.
Assicuratevi che tutto l'interno sia completamente spogliato, perché lo spray può rovinarlo, se non lo fa.
Facilità di applicazionePuò essere un po' difficile da tagliare e applicare.Spruzzare la vernice è abbastanza veloce e facile, ma può essere
un po' disordinato. Avrete bisogno di una pistola a spruzzo.
La coperturaCopre il corpo, ma non è in grado di coprire tutti i vuoti.In grado di coprire le costole,
i telai e l'intero corpo del veicolo.
La finituraCi sono alcuni casi di lacune e
cuciture.
Nessuna cucitura o lacuna. Tuttavia, c'è il rischio che dadi e bulloni si incastrino.
Prezzo$$$$$$$
SpessoreMeno spesso a 0,067 pollici (circa 1,7 millimetri). Più spesso da 0,40 a 0,60 pollici (circa 10-15 millimetri).

Capire la differenza principale tra i due prodotti è molto importante per fare un acquisto informato.

Controllo del suono della pelle di lucertola

Pelle di lucertola vs Dynamat
ir?t=noisefree08 20&l=li3&o=1&a=B00CQ53X7Y

Questo prodotto per il controllo del suono è spesso usato con un topcoat e un isolamento in ceramica. L'isolante ceramico è destinato all'isolamento termico, mentre la finitura è destinata all'estetica; dà al tutto una durata e una finitura lucida.

If you’re intending to use all three products together, you must know that the cost will be much higher than that of using just Dynamat.

You don’t have to use all three products together, though, as they’re not all compulsory for deadening. The Lizard Skin Control can be used for soundproofing your car on its own.

Questo prodotto è venduto in secchi da due galloni e l'azienda raccomanda anche due mani ad uno spessore di 0,4 a 0,6 pollici (circa 10 a 15 millimetri). Viene anche fornito un marcatore per misurare lo spessore. In generale, avrete bisogno di almeno quattro galloni di Lizard Skin Sound Control per un'auto media, e di circa sei galloni per un'auto con tetto rigido. Puoi usare this link per controllare il calcolatore della compagnia.

Come preparare il controllo del suono della pelle di lucertola

Before you begin to spray your car, you should know that partial installation isn’t an option, so once you decide to start, you’ll have to do the entire car. I’ve only seen a handful of people do a DIY job with Lizard Skin Sound Control. I think the best idea is to get a professional to do the job, as they’ll dismantle the appropriate parts of your vehicle to apply the spray effectively.

You’ll need a mixing kit that can be attached to a power drill, because the liquid must be mixed before it’s applied to your vehicle. Another thing you’ll need is a spray gun, and it’s best to use one designed by the same company.

Before you apply the Lizard Skin Sound Control, you’ll first need to protect all the important parts of the vehicle. You can use masking tape to cover things such as bolts, nuts, and holes. If you ignore this, you’ll have a hard time removing the coating from these parts.

It’s best if you protect all the surrounding areas with a plastic sheet, as you would before starting any other paint or spray job.

Come applicare il prodotto

You can start with a small area. It’s best to confirm with the marker that the thickness is correct, and then go ahead and add the first coat to an entire area. Repeat this process for each surface, but make sure you wait patiently for at least an hour before adding the second coat.

Pro

  • Non è richiesto alcun taglio, quindi nessun rischio di tagliare la pelle
  • Nessuna trappola per l'umidità
  • Molto economico da installare, rispetto al Dynamat
  • Tutte le aree del corpo, i telai e le costole sono coperti, il che significa che nessuna parte viene tralasciata
  • The installation process is easy and doesn’t require much time

Contro

  • Il compito può essere un po' difficile per alcuni, quindi consiglio di farsi aiutare da un professionista
  • Painting your vehicle can get messy if you aren’t careful
  • Can ruin your vehicle’s current paint job

Dynamat Sound Deadener

q? encoding=UTF8&ASIN=B00020CB2S&Format= SL250 &ID=AsinImage&MarketPlace=US&ServiceVersion=20070822&WS=1&tag=noisefree08 20

Dynamat is one of the most popular soundproofing materials on the market today. The only downside is its high cost, and that’s why a lot of people tend to go with cheaper alternatives.

Dynamat is also great for soundproofing a home theatre, even though it’s not the best solution for that task. However, for a vehicle it provides 100 percent soundproofing; it’ll block out most of the loud noise coming from anywhere in your environment while you’re inside your car.

Il Dynamat Xtreme è il materiale principale che coprirà la maggior parte del veicolo. Per l'isolamento termico, potete aggiungere del Dynaliner, che è leggero in confronto al Dynamat Xtreme.

Dynapad is another awesome product that Dynamat markets. It’s extremely heavy and tends to do a better job than Xtreme, but it’s too thick to be used for a whole car. Dynapad is most suitable for the floor of your vehicle, as it will be able to cover up the road noise that’s transmitted to the vehicle.

Come preparare Dynamat

Unlike Lizard Skin Sound Control, the installation process for Dynamat is fairly easy. You’ll only need to do a moderate amount of pre-installation work, and to make things much simpler, you can even do it in stages. There are no paints, sprays or dirty liquids involved that could damage your car.

Come applicare il prodotto

The one thing I really dislike about installing Dynamat is the cutting part. You have to have the right tools, and you’ll need to be very careful while cutting.

The process includes measuring your parts accurately and making the cuts. Once you’re finished, you should clean the surface, remove the release liner and stick down the Dynamat. The last step includes using a roller to apply the adhesive and ensuring that it sticks firmly.

I know you must be wondering if that’s all, and yes, it is! For smaller surfaces, this process is not a problem. For larger areas, such as the roof and floors, you’ll be sticking down big pieces of Dynamat. Removing the liner and sticking the Dynamat can be a long process, but you may be able to get a friend or family member to help.

Pro

  • Estremamente efficace nello smorzamento del rumore
  • Marchio di fiducia
  • Non a base di asfalto come altri tappeti fonoassorbenti
  • Doesn’t require much time to install

Contro

  • Costoso
  • Can’t cover 100 percent of the vehicle
  • A bit more difficult to work with, as you’ll have to ensure that there are no air gaps, or else moisture will get trapped

Dynamat vs. Lizard Skin Sound Control – Final Verdict

I’ve listed the advantages and disadvantages of both products above, so you can make an informed decision on which one best suits your needs.

That being said, I prefer Dynamat because I’ve used it before, and even though it’s a lot more expensive, it’s effective and will surely get the job done. As for the Lizard Skin, it’s also expensive; however, most of the user reviews for this product are positive.

I’m happy you were able to take the time to read our article. You can also check out my other articles on this site. If you have any questions, feel free to let us know by leaving a comment down below. Thank you!

Ecco un altro articolo che potrebbe piacerti: SoundSkins vs.Dynamat.

immagine: Pixabay

Lascia un commento