Jeep Wrangler à prova de som - 10 maneiras de reduzir o barulho alto

No matter what type of car you own, it almost goes without saying that cars make a lot of noise. However, Jeep Wranglers are especially noisy, and many people find their noise unpleasant, even though it contributes to this vehicle’s powerful image.

Fortunately, if you want to soundproof your Jeep Wrangler, all you’ll need to do is follow this guide carefully, and you should have a quieter car in no time.

Como usar o Jeep Wrangler à prova de som

1. Isolar a área sob o tapete

When it comes to soundproofing your car, there are tons of options and materials available. The first thing you’ll need to do is insulate your car’s floor, beneath the carpet, and you can start this process by adding an automotivo juta tapete. Due to the thickness of the carpet, it’ll provide excellent insulation and help protect your Wrangler’s flooring.

As an alternative, there are dozens of good sound-deadening mats you can use. I’ve only had experience with the FatMat auto-adesivoe sei com certeza que funciona extremamente bem. O FatMat é um som que pode ser usado em qualquer lugar em seu carro, incluindo o porta-malas e o compartimento do motor. Ele também pode ser aplicado nas portas e no teto.

The installation process is very easy. All you’ll need to do is remove the carpet that’s currently in your car and then put these mats on your car’s floor. After doing that, you can put the original carpet back again. Following that, you can expect to notice a big difference!

However, if you use the FatMat or the automotive jute carpet, and you don’t get the results you want, then you might consider using a tapete amortecedor de isolamento de espuma de células automotivas. This product has the same basic characteristics as FatMat. It’s also waterproof, so you don’t have to worry about it getting wet, and it’s extremely lightweight, along with being oil and petrol-resistant.

The installation process is quite the same: You’ll need to cut the mat with scissors or a knife to the correct size, and then install it underneath the car’s flooring. Make sure there are no gaps, because even the smallest gap can allow sound to pass through.

If you’ve found this guide helpful so far, you may also want to check out my guide to reducing vibration from a car’s subwoofer.

2. Use uma capa de vela

If your goal is to get rid of your vehicle’s noise completely, then this might be the right solution for you. This method is a bit more expensive than others, but it’ll be worth it in the end.

Topo de vela Bestop são muito populares e dizem que são 50% mais silenciosos que os normais. Se você decidir investir em um destes, há vários projetos diferentes para escolher - a um preço razoável.

3. Comprar um kit de revestimento de som

Outro método eficaz que você pode tentar é um kit de revestimento de som. Este kit feito sob medida ajudará a isolar o jipe do ruído externo, assim como das temperaturas quente e fria.

Eu recomendo o uso do Tapete DE boom because it’s very easy to install. It’s also extremely effective and quite affordable. For the best results possible, I’d recommend pairing it with a kit de guarnição de janela lateralEstes produtos funcionam bem em conjunto no combate ao ruído e à temperatura.

4. Mudar as faixas de tempo

One reason you might be hearing lots of wind when you’re driving quickly is the condition of your vehicle’s weatherstrips. Before taking any action, the best thing to do is check and see if the existing weatherstrips are properly sealed.

If they’re well-sealed, but you’re still hearing noise from the wind, then it’s time to replace them. You can find various weatherstrips online for an affordable price, and we recommend este aqui in particular. Weatherstripping is easy to install, but it’s best to let a professional do the installation, because even the smallest hole can cause a problem.

5. Troque Seus Pneus

If your weatherstripping is fine, your existing tires could be the reason why your Jeep Wrangler is so noisy. As a result, it’s a great idea to change your tires to a less aggressive type that won’t make as much noise. Even though there’s no way to tell exactly which tires are the quietest, you may find it helpful to check out this tópico do fórum onde proprietários de Jeep Wrangler discutem pneus silenciosos.

6. Isolar a área sob o capô

It would be difficult to soundproof an engine of any kind, especially one in a Jeep Wrangler, but adding insulation under the hood can reduce the noise level dramatically. The same material used to soundproof the jeep’s floor can also be used to insulate the hood.

Por mais complicado que possa parecer, este é um processo bastante simples. Você pode começar cobrindo o interior do capô com FatMat auto-adesivo. After you do so, you won’t be able to hear your engine’s noise, and it’s unlikely that you’ll face any difficulties while installing this material.

FatMat é o melhor produto para o trabalho, uma vez que pode suportar facilmente o calor, e tem uma vida útil bastante longa.

If you happen to have a van, as well as a jeep, here’s a useful guide to insonorização de um furgão de carga.

7. Comprar espelhos aerodinâmicos

You can also install aerodynamic mirrors in your jeep, which will significantly reduce the amount of noise from wind and drafts that you can hear. These mirrors will help break down the wind’s vibrations before they can hit your side windows and make “whooshing” noises.

8. Verificar a existência de falhas no elevador

A lifter is a small, cylindrical object that’s part of a vehicle’s engine. For a pushrod engine, the lifter pushes the pushrod up into the rocker arm and opens the valve. You should take the time to check the lifter in your Jeep Wrangler, because having a faulty lifter may result in unwanted noise.

One of the most common problems is that the lifter is worn out and needs to be replaced, while another common issue is that it has accumulated dirt and debris. If you find that your lifter is the main reason behind your vehicle’s unwanted noise, you can read more about quieting a noisy lifter aqui..

9. Usar tampões para os ouvidos

Even though this method is cost-effective, you should only consider it as a permanent solution if the previous ones didn’t make a difference in your Jeep Wrangler’s noise level.

If your car continues to make a lot of noise, you can simply pop earplugs into your ears, and you won’t be able to hear anything around you. You can also use this as a temporary solution if you haven’t had time to try out all the other methods above yet.

A desvantagem do uso de tampões auriculares é que isto pode diminuir seu nível de consciência ambiental. Se você os usar em uma estrada movimentada, isto pode ser realmente perigoso, pois as pessoas normalmente dependem de sua audição para se manterem seguras no trânsito intenso.

Dito isto, os melhores tampões auriculares do mercado são os Tampões de Orelha de Alta Fidelidade Eargasm. Com mais de 2.000 comentários positivos dos usuários sobre a Amazon, estes parecem valer o preço!

Conclusão

The Jeep Wrangler is noisier than most cars, because it has a very powerful engine, and the cabin is not insulated in a way that’ll completely block out noise. Luckily, there are many ways you can soundproof your Jeep Wrangler, and we’ve provided the most common solutions that won’t hamper the performance of your car. After trying these methods, you should notice a significant drop in your vehicle’s noise level, even if it still makes a bit of noise.

Para mais informações sobre materiais à prova de som em geral, você pode ler nossa comparação de SoundSkins vs. Dynamat.

imagem: Pixabay

Deixe um comentário